How To Fix STOP 0x0000004F Error On Windows?

Fix STOP 0x0000004F Error On Windows: Stuck on the STOP 0x0000004F error, this article will help you to resolve it without any third-party assistance. To get a better understanding of this error, read more about it in the article.

Is your operating system NT-based One?

NT-based operating systems include Windows10, Windows8, Windows7, Windows Vista, Windows XP, Windows 2000, and Windows NT.

Understanding The Error STOP 0x0000004F

This type of error code usually occurs as the result of a combination of hardware and software problems. This can lead to Blue Screen Errors, System Crashs, or Unexpected System Exits. This can occur due to overheating or bad configuration settings.

The error is displayed as a STOP message, known as BSOD (Blue Screen of Death). This is the state in which the operating system cannot be used safely.

What can be the major plots for malfunctioning the machine?

  • Incompatible System Drivers
  • Overheating Component
  • Abrupt Power Supply
  • Obsolete System Drivers
  • Insufficient System Memory
  • Corrupt Registry Settings
  • Incompatible BIOS Settings

It is important to verify whether the error on your computer matches the error mentioned above.

 

How To Fix STOP 0x0000004F Error

Here are some methods to fix STOP 0x0000004F error.

1. Shutdown your computer or restart

It is best to try the easiest solution first. Shutting down your computer or restarting it may help you eliminate this problem. It helps the CPU to dump temporary files and also helps heat the CPU.

2. Fix through the command

Usually, the command prompt on your computer resolves issues quickly. The error STOP 0x0000004F might occur due to corrupted data files. To find them, use the “scan now” command to scan for corrupted data files and fix any found.

Let’s check the following steps if any issue occurred due to corruption file/files.

  • First of all, you need to open the Start menu that is on the left corner of the display or press Window Key + S for Windows 10.
  • Click on “Command Prompt”.
  • Now, click on “Run as administrator”.
  • Here you see the Black Command Window.
  • Type “SFC/scannow” and press the Enter button to proceed.

Once you hit enter, a system scan will begin. You must wait for the scan to be completed. After completion, you will see a message like the following: “Windows found corrupted files and repaired them successfully”.

3. Check the hard drive

Sometimes the system Hard Drive becomes corrupted. This can happen if the computer crashes, hard or force shuts down, software becomes corrupted, or the installation process is incomplete. Because of these events, high-level system errors occur, such as 0x0000004F.

Let’s check the following steps if any issue occurred due to hard disk corruption.

  • First, open the Start menu that is on the left corner of the display or press Window Key + S for Windows 10.
  • Click on “Command Prompt”.
  • Now, click on “Run as administrator”.
  • Type “chkdsk c:/r” and press the Enter button.
  • Type “Y” and press the Enter button.

Sit back and wait for approximately 10 to 20 minutes for chkdsk to complete its task. If it shows “0 KB in the bad sector”, then you’re fine – otherwise, you should consider upgrading your mechanical hard disk to a solid-state drive.

4. Updating Graphics drivers

The update of drivers for a PC is always important as outdated or faulty drivers can cause STOP 0x0000004F.

You also need to update the Graphics card/video card drivers if you are still running Windows 10 on an older CPU such as the Intel Core i5 2nd Gen or AMD A4-6210 processor. Such hardware isn’t compatible with the Windows 10 edition.

You can follow the steps given below to update the system drivers:

  • First, open the Start menu that is on the left corner of the display or press Window Key + S for Windows 10.
  • Click on “ Device Manager”.
  • Look for “Display Driver” and right-click on the Graphics driver to update the driver.
 Fix STOP 0x0000004F Error On Windows 1
Fix STOP 0x0000004F Error On Windows 1
  • A new window will appear, choose “Search automatically for drivers” and the windows will look for new drivers update.
 Fix STOP 0x0000004F Error On Windows 2
Fix STOP 0x0000004F Error On Windows 2

The process may take a few minutes to connect to the Microsoft servers. Once it happens, it will download and install the drivers automatically. Make sure you’ve enabled the Windows Update. If you don’t, the system will say that the drivers have been installed already.

On the other hand, if you want, you can manually download the latest drivers by going to the manufacturer’s website. However, it can be difficult to do if you haven’t done it before.

5. Check your computer’s temperature

It is recommended that you change your computer or laptop’s thermal plate whenever necessary since you will encounter dust, corrosion, insects, or temperature issues that may affect the PC badly.

Don’t waste your time if you still encounter the same issue or found some overheating components. Instead, seek professional assistance to solve your overheating issue. Do not use your own thermal paste if you have zero experience in doing this. Use professional assistance to perform this task safely.

What causes registry errors?

Due to improper uninstalling of applications registry errors occur.

What is Windows stop code error?

Your system shuts down or restarts unexpectedly when you encounter stop code errors.

Can a computer run without RAM?

No, you can’t run a computer without RAM.